FLASHTIM=1_BASE_M3_CLK_CLOCK, POW=POWER_DOWN
Flash accelerator configuration register for flash bank A
| RESERVED | Reserved. Do not change these bits from the reset value. |
| FLASHTIM | Flash access time. The value of this field plus 1 gives the number of BASE_M3_CLK clocks used for a flash access. Warning: Improper setting of this value may result in incorrect operation of the device. All other values are allowed but may not be optimal for the supported clock frequencies. 0 (1_BASE_M3_CLK_CLOCK): 1 BASE_M3_CLK clock. Use for BASE_M3_CLK up to 21 MHz. 1 (2_BASE_M3_CLK_CLOCKS): 2 BASE_M3_CLK clocks. Use for BASE_M3_CLK up to 43 MHz. 2 (3_BASE_M3_CLK_CLOCKS): 3 BASE_M3_CLK clocks. Use for BASE_M3_CLK up to 64 MHz. 3 (4_BASE_M3_CLK_CLOCKS): 4 BASE_M3_CLK clocks. Use for BASE_M3_CLK up to 86 MHz. 4 (5_BASE_M3_CLK_CLOCKS): 5 BASE_M3_CLK clocks. Use for BASE_M3_CLK up to 107 MHz. 5 (6_BASE_M3_CLK_CLOCKS): 6 BASE_M3_CLK clocks. Use for BASE_M3_CLK up to 129 MHz. 6 (7_BASE_M3_CLK_CLOCKS): 7 BASE_M3_CLK clocks. Use for BASE_M3_CLK up to 150 MHz. 7 (8_BASE_M3_CLK_CLOCKS): 8 BASE_M3_CLK clocks. Use for BASE_M3_CLK up to 172 MHz. 8 (9_BASE_M3_CLK_CLOCKS): 9 BASE_M3_CLK clocks. Use for BASE_M3_CLK up to 180 MHz. |
| RESERVED | Reserved. Write zeros only to these bits. |
| POW | Flash bank A power control 0 (POWER_DOWN): Power-down 1 (ACTIVE): Active (Default) |